機器簡介 Mchine introduce  1、該生產線由兩臺斜邊機連線組成。一臺用于斜邊粗精磨和底邊的倒角去毛刺，另一臺用于拋光。 2、傳送帶采用滾輪軸承結構，使玻璃的傳送帶加工更加平穩。后導軌上下升降，加工范圍廣且穩定性高?？稍诒緳C(jī)上自磨后傳送板，使之長久保持高精度。 3、裝有自動和手動供油系統，使整機能保持在良好的潤滑條件下工作，使用壽命更長。后導上裝有自動清洗機，用于磨削過程中后傳送板清潔。 4、電氣控制系統采用進口電器元件，運用PLC進行手動和自動控制，人機界面顯示被加工玻璃的厚度、斜邊角度、斜邊寬度及底邊剩余厚度等參數。特別是機臺拋光部分，采用進口線性滑軌，運行靈活而卻精密度高，拋光品質好。 5、FZM2有兩個轉臺，兩個磨頭臂，能同時對兩塊玻璃制品的周邊進行磨削加工，磨頭臂的擺動采用了緩沖氣缸的推動，使磨輪平穩接觸，加工玻璃的周邊采用自動化控制。 1、The production line is composed of two sets beveling machines. One is used for rough and fine grinding and arris; the other is used for polishing. 2、 The convey belt adopts roll bearing structure to make sure processing more stable. And the rear guide rail with lift device, which increased processing range and stability. The machine can grind rear conveyor plate by itself to keep high accuracy for long life. 3、Auto and manual oil supply system are equipped to guarantee machine working under a good lubrication condition to increase stability. Cleaner be mounted on front and rear guide rail, which clean front and rear conveyor plate in grinding process. 4、Electrical system adopts import components; apply PLC control auto/manual program, HMI display data of glass thickness，bevel angle, bevel width and remaining thickness of bottom edge. 5、Especially the polishing unit, it adopts import linear slide guide, with high flexibility and high precise polishing quality. 主要技術參數 Main technical parameter:  速度范圍 Speed range                      0.4-5 m/min 加工斜邊角度 Bevel angle               3°-15° 較大斜邊寬度 Max. bevel width       85 mm 加工玻璃厚度 Glass thickness          3-19 mm 總功率 Total power                          54.64Kw 設備尺寸Overall dimension                16.35*1.51*2.235 M (L*W*H) 總重量 Total weight                          15600 Kg