福爾斯特F363E玻璃直線直邊磨邊機（12磨頭） 機器簡介 1．該機用于平板玻璃直線平底邊以及前后倒角的磨削和拋光。2．傳送帶采用滾動軸承結構，每件夾板分別安裝我公司為機器專門定制的3種型號共5個軸承，分別為承重軸承，導向軸承和扣簧軸承，使玻璃的傳送加工更加平穩，保證玻璃底邊及棱邊的加工精度。  3.拋光系統采用氣動和手動雙機構，工作性能穩定.可在本機上自磨后傳送板，使之長久保持高精度。4.分別裝有自動和手動的供油系統能使整機保持在良好的潤滑條件下工作，運行更穩定。5．電器控制系統采用高端進口電器元件，運用PLC進行手動和制動控制，人機界面可顯示被加工玻璃的厚度及傳送速度等加工參數。 1.The machine is suitable for grinding and polishing of flat glass as well as front-rear arris rough and fine grinding.                                                                                2. The conveyor belt rolling bearing structure, per piece splint separately install 3 types altogether 5 bearings which our company specially custom-bulit for this machine，Are load bearing, oriented bearing and buckle spring bearing,which makes glass conveyor more stable,and keep processing accuracy in bottom edge and arris.                                                                                                                            3. Polishing applies pneumatic and manual double system,which has more stable performance.The machine can grind rear conveyor plate by itself to keep high accuracy for long life.4.Auto an manual oil supply system are equipped to guarantee machine working under a good lubrication condition to increase stability.                                                                                          5.Electrical system adopts import components;apply PLC control auto/manual program,HMI display date of glass thinckness and running speed. 主要技術參數 速度范圍Speed range------------------------0.6 - 6.0 n/min 加工較小玻璃尺寸Min glass size---------30mm 加工較大玻璃寬度Max glass width-------3000 mm 加工玻璃厚度Glass thickness range-------3 - 30 mm 總功率Total power---------------------------27.6 kw 設備尺寸Unit size----------------------------7.8×1.45×2.75 M (L*W*H) 總重量Total weight---------------------------6100 kg